Increasing productivity, reducing cost, reducing soil damage, reducing the impact of harvesting on standing tree and regeneration are all very important objectives in ground skidding system in the management of the Hyrcanian forest. The research carried out to obtain these objectives included four logging methods, tree length method (TLM), long length method (LLM), short length method (SLM), and wood extraction by mule (mule) in northern Iran. In order to determine the cost per unit, time study techniques were used for each harvesting method, time study data are shifted to logarithmic data based on 10. On the basis of the developed models simulated, 11 skidding turns are simulated and the unit cost are estimated depending on the diameter of the log (DL), skidding distance (SD), and the winching distance (WD) for 11 different cycles with TLM, LLM and SLM.
The results showed that on average, the net costs per extraction of one cubic meter of wood were 3.06, 5.69, 6.81 and 34.36 €/m3 in TLM, LLM, SLM and mule. The costs depending on diameter of log (DL), skidding distance (SD) and winching distance (WD) showed that the most economical alternative for Northern Iran is TLM. In the cut-to-length system, the costs of both alternatives LLM, SLM were significantly dependent on DL. , thus the result of this study suggests that as long as the diameter of the felled trees is less than 40 cm, the cut-to-length system is not an economical alternative, whilst the cut-to-length method can be applied for trees with a diameter more than 40 cm. Where diameters are more than 40 cm TLM it is more economical than SLM, however it was not significantly different. Depending on SD in short skidding distance SLM is preferable to LLM but in cases of long skidding distance LLM is more economical than SLM. The winching distance affect was not a factor on cost.
To assess the damage on seedlings and standing trees a 100% inventory method was employed in pre-hauling and post-hauling, alongside of skidding trails, winching strips and mule hauling with a 12m width. To chose the best alternative depending on standing damage the Analysis of multiple criterial approval (MA) was applied. The amount of trees damaged by winching operation were 11.89% in TLM, 14.44% in LLM 27.59%, SLM and 0 stem and by skidding operation were 16.73%, 3.13% and 8.78% of total trees in TLM, LLM and SLM. In the winching area about 14%, 20%, 21% and 6 % of the total regeneration was damaged by TLM, LLM, SLM and mule and the skidding operation damaged 7.5% in TLM, 7.4 % LLM and 9.4% in SLM. The friendliest alternative to residual standing was mule but in manual method (where the wood extraction is done by skidder) MA showed that the best alternative depending on residual damage is LLM.
To determine the degree of soil compaction a core sampling technique of bulk density was used. Soil samples collected from the horizontal face of a soil pit at 10 cm depth soil core, at 50m intervals on skid trials, in winching strips and control are (no vehicles pass) a soil sample was taken at 10m intervals in the hauling direction of the mule. In order to determine the post-harvesting extent of disturbance on skidding trails by skidding operations, the disturbed widths were measured at 50 m intervals along the skid trails. In the winching area, where the winched logs created a streak of displaced soil, the width of the displaced streak was measured at 5 m interval along the winching strip. In mule hauling operations the width of a streak created by a mule foot track was measured at 10 m intervals.
To compare increased average bulk density between alternatives one way The ANOVA, Duncan test and Dunnett t-test with a 95 % confidence level were used. A General linear model was applied to relate the increasing bulk density and the slope gradient. To realize the correlation between the increment of soil bulk density and the slope gradient and the correlation between the soil compaction and soil moisture content (%) The Pearson correlation test was applied. To choose the best alternative (in manual method) a MA test was applied again. The bulk density on the skidding trail increased 51 % for 30 skidding turn, 35 % for 31 skidding turn (one unloaded and one loaded pass) and 46% for 41 skidding turn. Results of ANOVA (p < 0.05) show significant differences of bulk density between alternatives. Duncan test and the Dunnett t-test indicated that the increasing soil bulk density was not significant between control samples and winching strip of TLM and extraction by mule samples.
The general linear modeling and Pearson correlation test results indicated that the slope gradient had an insignificant effect on soil compaction, whilst the Pearson test indicates a medium negative correlation between soil compaction and percentage of soil moisture. By ground-based winching operation 0.07%, 0.03%, 0.05% and 0.002% of the total area and by ground based skidding operation 1.21%, 1.67%, 0.81% and 0.00% of total area was disturbed and compacted in TLM, LLM, SLM and mule. The Pearson correlation results show that the width of disturbed area was significantly influenced by the diameter of logs and length of logs (p ˂ 0.05), but there is no significant correlation between soil disturbance width and slope. The results of analysis of MA showed that soil compaction was not related to logging method but sensitivity analysis of MA shows that LLM and TLM are both preferable to SLM.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa.de:bsz:14-qucosa-145790 |
| Date | 04 July 2014 |
| Creators | Badraghi, Naghimeh |
| Contributors | Technische Universität Dresden, Fakultät Umweltwissenschaften, Prof. Dr. Jörn Erler, Prof. Dr. Jörn Erler, Prof. Dr. Michael Müller, Prof. Dr. Karl Stampfer |
| Publisher | Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | doc-type:doctoralThesis |
| Format | application/pdf |
Page generated in 0.0034 seconds