Modern construction practices require proper knowledge to predict concrete pumping pressure, especially in high-volume and high-rise applications. Despite the progress made over the last decades, the spread of concrete pumping to high-rise construction has been hampered by the lack of standardized operating procedures and performance criteria. By and large, the guidelines available today focus predominantly on pumping Conventional Vibrated Concrete (CVC), while ambiguity still surrounds pumping Self-Consolidating Concrete (SCC) and other types of Highly-Workable Concrete (HWC). This PhD dissertation focuses on the fundamental principles relevant to the flow of high-strength SCC in pumping pipes, and it aims to develop methods to predict and reduce the required pumping pressure. The flow pattern of SCC in pipes is analytically investigated, providing a numerical approach to predict the pumping pressure based on the properties of both concrete and the lubrication layer, the pipe diameter, and the flow rate. The analytical results are further validated through full-scale pumping tests executed at the laboratory of the Université de Sherbrooke. Through this phase 26 optimal concrete mixtures were pumped in a 30-m pumping circuit to investigate the interactions between the concrete properties and pressure loss. The same tests are also employed to empirically correlate pressure loss with rheological and tribological properties of concrete at different flow rates. The resulting correlations furnish instrumental models capable of computing pressure loss for a wide range of concrete properties. In another application, the experimental results are analyzed to identify the influence of pumping on concrete properties with time. Full-scale pumping results are statistically analyzed in order to establish a quantitative description of the most influential parameters governing the concrete flow in pipes. As a result, concrete pipe flow is statically modeled, allowing the computation of pressure loss at different flow rates based on the the rheological and tribological properties of the concrete and the pipe diameter. Another statistical model is derived to calculate the pressure loss as a function of the V-funnel flow time, granting the advantage of predicting the pressure loss on job sites without the need for complex rheological and tribological measurements. In light of the research findings of the previous phases, a new simple test method called the pipe flow test (PFT) is developed in the context of this research, specifically for predicting pipe flow pressure loss. With preceding research phases as insights, the final stage of this project is directed toward mix design optimization faced with the challenge of reducing the pumping pressure and meeting the strength requirements of high-strength SCC. Ultimately, the research findings emanating from this investigation provide practical guidelines and conclusive models to predict and reduce pumping pressure for a wide scope of concrete mixtures and pipe diameters.
Identifer | oai:union.ndltd.org:usherbrooke.ca/oai:savoirs.usherbrooke.ca:11143/6634 |
Date | January 2013 |
Creators | Khatib, Rami |
Contributors | Khayat, Kamal H. |
Publisher | Université de Sherbrooke |
Source Sets | Université de Sherbrooke |
Language | English |
Detected Language | English |
Type | Thèse |
Rights | © Rami Khatib |
Page generated in 0.0025 seconds