The work contained herein is in pursuance of the Development of the
SMART aircraft bolt. Failure of the bolt in the aircraft wing is taken for
granted in the project, and the consequent repairs are presently very
costly. The SMART material investigated in this work is the TRIP steel,
and any reference to SMART material, in this work, shall at all time
mean TRIP steel.
Investigation of the stresses pertaining to bolts in general is carried out,
based on the bolt theories and using the finite element analysis. An
optimal bolt based on impact resistance only has also been suggested.
Metallurgical behaviour of materials similar to TRIP materials is also
investigated, including a section dedicated only to TRIP steels.
Therefore, the work contained herein acts as a good base for further
research. / Thesis (M.Sc.Eng.)-University of Natal, Durban, 2002.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:ukzn/oai:http://researchspace.ukzn.ac.za:10413/4784 |
Date | January 2002 |
Creators | Msibi, L. L. |
Source Sets | South African National ETD Portal |
Language | English |
Detected Language | English |
Type | Thesis |
Page generated in 0.001 seconds