Made available in DSpace on 2014-12-17T14:07:00Z (GMT). No. of bitstreams: 1
CassioFC_DISSERT.pdf: 3473717 bytes, checksum: 62553a61815c3d6ecf0b6b9390381d0c (MD5)
Previous issue date: 2012-02-09 / This dissertation presents a hybrid ceramic block the use of which reside in the
buildings executed with walls. Initially, we conducted a survey on the requirements
and / or norms prevailing in Brazil about structural ceramic blocks, making use of the
experiences in other countries. This work seeks new materials and / or products in
order to maintain or increase the compressive strength of the ceramic blocks, without
neglecting the other properties. Then was collected materials (clay and crushed
powder) and an approach on the characterization, through fluorescence, Mineralogy,
vitrification curve and characterization of these materials used in the manufacture of
the blocks by Ray Diffraction "X" and SEM. Subsequently it was made, numbered
and measured dimensions of about 150 bodies of the test piece (hybrid ceramic
blocks in small sizes) with varying percentages of 0%, 5%, 10% and 15% substitution
of crushed clay powder. After sintering of the bodies of the test piece at temperatures
of 900oC, 1000oC 1100oC and with a heating rate of 5oC/minuto and level of 1 hour,
the samples were submitted to the tests (compressive strength and water absorption)
and calculated their retractions, which were subsequently carried out the analysis of
the results according to the criteria and parameters required by Brazilian legislation
and standards in force / Esta disserta??o apresenta um bloco cer?mico h?brido cuja utiliza??o reside nas
edifica??es executadas com alvenarias estruturais. Inicialmente, foi realizada uma
pesquisa sobre as exig?ncias e/ou normatiza??es vigentes no Brasil a cerca de
blocos cer?micos estruturais, fazendo uso das experi?ncias nos outros pa?ses. Este
trabalho busca novos materiais e/ou produtos com a finalidade de manter ou elevar
a resist?ncia ? compress?o dos blocos cer?micos, sem desprezar as demais
propriedades. Em seguida, foi realizada coleta dos materiais (argila e p? de brita) e
uma abordagem acerca da caracteriza??o, atrav?s da Fluoresc?ncia, Mineralogia,
Curva de Gresifica??o e Caracteriza??o destes materiais utilizados na confec??o
dos blocos, atrav?s da Difra??o de Raio X e MEV. Posteriormente, foram
confeccionados, numerados e medidos as dimens?es de aproximadamente 150
corpos-de-prova (blocos cer?micos h?bridos em tamanhos reduzidos) com
percentuais que variam de 0%, 5%, 10% e 15% de substitui??o de p? de brita a
argila. Ap?s a sinteriza??o dos corpos-de-prova a temperaturas de 900oC, 1000oC e
1100oC com taxa de aquecimento de 5oC/minuto e patamar de 1 hora, as amostras
foram encaminhadas para a realiza??o dos ensaios (resist?ncia a compress?o e
absor??o de ?gua) e calculado as respectivas retra??es, que posteriormente foram
realizados as analises dos resultados de acordo com os crit?rios e par?metros
exigidos pelas Normas e Legisla??o brasileira vigente
Identifer | oai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/12733 |
Date | 09 February 2012 |
Creators | C?mara, C?ssio Freire |
Contributors | CPF:05012180410, http://lattes.cnpq.br/9858094266525225, Chaves, Leonardo Flamarion Marques, CPF:02837501468, Silva, Elialdo Chib?rio da, CPF:85241580425, http://lattes.cnpq.br/5426129339908081, Silva, Gilson Garcia da, CPF:56634161453, http://lattes.cnpq.br/8681275097040450, Gomes, Uilame Umbelino |
Publisher | Universidade Federal do Rio Grande do Norte, Programa de P?s-Gradua??o em Ci?ncia e Engenharia de Materiais, UFRN, BR, Processamento de Materiais a partir do P?; Pol?meros e Comp?sitos; Processamento de Materiais a part |
Source Sets | IBICT Brazilian ETDs |
Language | Portuguese |
Detected Language | English |
Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis |
Format | application/pdf |
Source | reponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds