In the study, micro-PEM fuel cells are designed and fabricated in-house through a deep UV lithography SU-8 process and a wet etching technique for perforated holes plates (diameter is 750 £gm) of 50 £gm thickness of pure copper. Measurements of cell performance are performed using the low percentage of the weight concentration (1-10 wt. %) of NaOH solution, Al paper as the source material for hydrogen production, and different open ratios of the perforated plates to determine which best improves cell power density. Experimental results are presented in the form of polarization VI and PI curves under the above operating conditions. The experimental results show cell performance is enhanced by the self-heating, humidifying of hydrogen production, hydrogen internal circulation and accumulated pressure. Finally, the micro-PEM fuel cell system with DC/DC boost converter can generate 4.99 V for use in cellular phone accumulators charging.
Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0805110-134649 |
Date | 05 August 2010 |
Creators | Chen, Zeng-yi |
Contributors | Ching-Jenq Ho, Shou-Shing Hsieh, Chin-Chia Su |
Publisher | NSYSU |
Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
Language | Cholon |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0805110-134649 |
Rights | unrestricted, Copyright information available at source archive |
Page generated in 0.0126 seconds