Thesis (MScEng)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: There is a need for a coarse-to-fine positioning system as per a case study
presented by the project collaboration partner, the Technical University of
Chemnitz. The case study involves the picking and placing of piezo-ceramic
micro parts into milled micro cavities. The focus of the project is the creation
and development of a systematic approach for the design and the implementation
of a coarse-to-fine positioning system for micro material handling. A
second focus is to determine the applicability of the system for highly accurate
and repeatable micro drilling and micro-milling. A systematic approach entails
combining innovation management (assists in overall project structure),
systems engineering (assists in specific design steps and tools) and research
questions. Micro-milling was achieved, however the system proved unsuitable
for highly accurate and repeatable micro drilling. The coarse-to-fine positioning
system was successfully designed, built, and tested for accurate micro
material handling. / AFRIKAANSE OPSOMMING: Daar bestaan ’n behoefte aan ’n grof-tot-fyn-posisioneringstelsel - soos blyk uit
die gevallestudie uiteengesit deur die samewerkende projekvennoot, die Tegniese
Universiteit van Chemnitz. Die gevallestudie behels die uitsoek en plasing
van piezo-keramiek partikels in gefreesde mikroholtes. Hierdie projek het gefokus
op die skepping en ontwikkeling van ’n stelselmatige benadering tot die
ontwerp en implementering van ’n grof-tot-fyn-posisioneringstelsel vir mikromateriaalhantering
en mikromasjienering. ’n Stelselmatige benadering behels
dat innovasiebestuur (hulp met die algehele projekstruktuur), stelselingenieurswese
(hulp met spesifieke ontwerpstappe en -hulpmiddels) en navorsingsdoelwitte
gekombineer word. Die geïmplementeerde stelsel is eksperimenteel
getoets en daar is bevind dat dit aan die spesifikasies en vereistes voldoen.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/80394 |
Date | 03 1900 |
Creators | Read, Sebastian E. A. |
Contributors | Van der Merwe, A., Schutte, C. S. L., Stellenbosch University. Faculty of Engineering. Dept. of Industrial Engineering. |
Publisher | Stellenbosch : Stellenbosch University |
Source Sets | South African National ETD Portal |
Language | en_ZA |
Detected Language | English |
Type | Thesis |
Format | xxiii, 371 p. : ill. |
Rights | Stellenbosch University |
Page generated in 0.0085 seconds