Global warming is a significant threat to our planet. Adopting the Paris Agreement is a global action that aims to reduce greenhouse gas emissions. An extensive deployment of negative emission technologies (NETs) is required to achieve the targets set by the Paris Agreement. Bioenergy with carbon capture and storage (BECCS) is emerging as one of the most promising NETs. Among different biomass utilization processes, integrating BECCS with biomass-fired and waste-fired combined heat and power (bio-CHP and w-CHP) plants has been considered the most feasible solution. Bio/w-CHP plants are characterized by high fluctuations in operation, which can result in more dynamic variations of flue gas (FG) flowrates and compositions and available heat for CO2 capture. Such changes can clearly affect the performance of CO2 capture; therefore, doing dynamic simulations becomes crucial. This thesis aims to investigate the performance of different dynamic physical model-based approaches and provide suggestions for approach selection. In addition, the data-driven modeling approach, which is an emerging technology, has also been tested. Three physical model-based approaches include the ideal static model (IST), the dynamic approach without control (Dw/oC), and the dynamic approach with control (DwC). To compare their performance, the operating data from an actual waste CHP plant is employed. Various cases have been defined considering different critical operating parameters, including the FG flowrate, the CO2 concentration (CO2vol%), and the available heat for CO2 capture. Apparent differences can be observed in the results from different approaches. For example, when the CO2vol% drops from 15.7 % to 9.7 % (about 38 %) within 4 hours, the difference in the captured CO2 can be up to 22% between DwC and Dw/oC. It is worth noting that when there are both increases and decreases in the variations of parameters, the differences become smaller. Based on the comparison, the recommendations on approaches have been summarized. Dw/oC is recommended for checking the boundary of safety operation by the response analysis. DwC is recommended for designing the control system, observing the flexible dynamic operation, estimating the short-term CO2 capture potential, and optimizing the hourly dynamic operation. IST is recommended for estimating the long-term CO2 capture potential, and optimizing the long-term dynamic operation when the input parameters vary not as often as hourly. A data-driven model, Informer, is developed to model CO2 capture dynamically. The dataset is generated by using a physical model. The FG flowrate, the CO2vol%, the lean solvent flowrate, and the available heat for CO2 capture are employed as input parameters, and the CO2 capture rate and the energy penalty are chosen as outputs. The results show that Informer can accurately predict dynamic CO2 capture. The mean absolute percentage error (MAPE) was found to be 6.2% and 2.7% for predicting the CO2 capture rate and energy penalty, respectively.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:mdh-66188 |
| Date | January 2024 |
| Creators | Dong, Beibei |
| Publisher | Mälardalens universitet, Framtidens energi |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Licentiate thesis, comprehensive summary, info:eu-repo/semantics/masterThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Mälardalen University Press Licentiate Theses, 1651-9256 ; 356 |
Page generated in 0.0018 seconds