This thesis presents the practical and novel work in the area of optimal placement of actuators and sensors for sound-structure interaction systems. The work has been done by the author during his PhD candidature. The research is concentrated in systems with non-ideal boundary conditions as in the case in practical engineering applications. An experimental acoustic cavity with five walls of timber and a thin aluminium sheet fixed tightly on the cavity mouth is chosen in this thesis as a good representation of general sound-structure interaction systems. The sheet is intentionally so fixed that it does not satisfy ideal boundary conditions. The existing methods for obtaining optimal sensor-actuator location using analytic models with ideal boundary conditions are of limited use for such problem with non-ideal boundary conditions. The method presented in this thesis for optimal placement of actuators and sensors is motivated by energy based approach and model uncertainty inclusion. The optimal placement of actuator and sensor for the experimental acoustic cavity is used to construct a robust feedback controller based on minimax LQG control design method. The controller is aimed to reduce acoustic potential energy in the cavity. This energy is due to the structure-borne sound inside the sound-structure interaction system. Practical aspects of the method for optimal placement of actuator and sensors are highlighted by experimental vibration and acoustic noise attenuation for arbitrary disturbance using feedback controllers with optimal placement of actuator and sensor. The disturbance is experimentally set to enter the system via a spatial location different from the controller input as would be in any practical applications of standard feedback disturbance rejections. Experimental demonstration of the novel methods presented in this thesis attenuate structural vibration up to 13 dB and acoustic noise up to 5 dB for broadband frequency range of interest. This attenuation is achieved without the explicit knowledge of the model of the disturbance.
Identifer | oai:union.ndltd.org:ADTP/240835 |
Date | January 2006 |
Creators | Suwit, Pulthasthan, Information Technology & Electrical Engineering, Australian Defence Force Academy, UNSW |
Publisher | Awarded by:University of New South Wales - Australian Defence Force Academy. School of Information Technology and Electrical Engineering |
Source Sets | Australiasian Digital Theses Program |
Language | English |
Detected Language | English |
Rights | Copyright Pulthasthan Suwit, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0013 seconds