Conventional stainless steel - water and ceramic fabric composite water
heat pipes have been built and tested. The tests have been conducted to compare
the performance characteristics between conventional and fabric composite heat
pipe radiators for space nuclear power heat rejection systems. The fabric
composite concept combines a strong ceramic fabric with a thin metal liner to form
a very lightweight heat pipe. The heat pipes tested have used identical,
homogeneous fabric wicks and water as the working fluid. One fabric composite
heat pipe has been constructed by fitting a braided aluminoborosilicate fabric tube
over the outside of the conventional stainless steel heat pipe. A more advanced
fabric composite design combines the woven fabric with a 0.25 mm (10 mil)
stainless steel tube as the liner, and reduces the mass of the heat pipe by a factor of
three.
A heat pipe testing facility was designed and built for the purpose of testing
various conventional and fabric composite heat pipes. This facility allows the
testing of heat pipes in a vacuum, at low temperatures, and can accommodate a
variety of heat pipe designs. Instrumentation and computer interfacing provide for
continuous monitoring and evaluation of heat pipe performance.
Tests show that heat pipe radiator capacity can be significantly enhanced by
using the fabric composite design. Tests comparing a conventional heat pipe with
fabric composite heat pipes achieved a 100% increase in the emissivity and heat
rejection capacity of the radiator. Since the ceramic fabric is strong enough to
withstand the internal pressure of the heat pipe, a very thin metal foil can be used
to contain the working fluid. The increase in heat rejection capacity, combined
with the significant reduction in the heat pipe mass, translates into a substantial
savings for space power systems employing fabric composite heat pipe radiators. / Graduation date: 1993
Identifer | oai:union.ndltd.org:ORGSU/oai:ir.library.oregonstate.edu:1957/36479 |
Date | 16 December 1992 |
Creators | Kiestler, William C. |
Contributors | Klein, Andrew C. |
Source Sets | Oregon State University |
Language | en_US |
Detected Language | English |
Type | Thesis/Dissertation |
Page generated in 0.001 seconds