Scope of the presented work is a detailed comparison of a macroscopic draping model with real fibre architecture on a complex non-crimp-fabric preform using a new robot-based optical measurement system. By means of a preliminary analytical process design approach, a preforming test centre is set up to manufacture dry non-crimp-fabric preforms. A variable blank holder setup is used to investigate the effect of different process parameters on the fibre architecture.The real fibre architecture of those preforms is captured by the optical measurement system, which generates a threedimensional model containing information about the fibre orientation along the entire surface of the preform. The measured and calculated fiber orientations are then compared with the simulation results in a three-dimensional overlay file. The results show that the analytical approach is able to predict local hot spots with high shear angles on the preform. Macroscopic simulations show a higher sensitivity towards changes in blank holder pressure than reality and limit the approach to precisely predict fibre architecture parameters on complex geometries.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:35794 |
| Date | 29 October 2019 |
| Creators | Mallach, Annegret, Härtel, Frank, Heieck, Frieder, Fuhr, Jan-Philipp, Middendorf, Peter, Gude, Maik |
| Publisher | Sage |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, doc-type:article, info:eu-repo/semantics/article, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | 1530-793X, 10.1177/0021998316670477 |
Page generated in 0.0022 seconds