M.Ing. (Electrical and Electronic Engineering) / A distributed temperature fiber sensor based on the ratio of the Raman anti-Stokes to Rayleigh backscattered light components is studied. The aim of the study is to propose a method of quantifying the noise exhibited in the Rayleigh backscattered signal and further propose correlation coding techniques to reduce the noise in the Rayleigh and Raman backscattered signals. The noise in the Rayleigh backscattered signal is referred to as “interferometric noise”. When Rayleigh scattering along the length of an optical fiber occurs, some of the scattered light travels in a direction opposite to the direction of propagation, and is called backscattered light. When the coherence length of the optical source permits interactions between the Rayleigh backscattered light, there is a possibility for the interacting backscattered light, within a distance that is half the coherence length, to interfere with each other. Furthermore, when the sensing optical fiber is greater than the coherence length of the optical source, there will be several interference sections along the length of the sensing fiber causing the intensity of the Rayleigh backscattered light at the photo-detectors to vary randomly. The intensity variation gives the Rayleigh backscattered signal a jagged appearance indicating the presence of interferometric noise. The longer the coherence length of the optical sources, the larger the intensity variations in the backscattered light, that is, the more the interferometric noise exhibited. The more the interferometric noise in the Rayleigh backscattered signal, the poorer the temperature accuracy of the distributed temperature sensor based on the ratio of the Raman anti Stokes to Rayleigh backscattered components. To quantify the interferometric noise affecting the Rayleigh backscattered signal, a mathematical model based on well-known scattering and interferometry theories is developed. Using the developed mathematical noise model, noise powers of approximately -52dBm and -40dBm for coherence lengths of 4m and 24m are respectively obtained...
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uj/uj:13647 |
| Date | 29 June 2015 |
| Source Sets | South African National ETD Portal |
| Detected Language | English |
| Type | Thesis |
| Rights | University of Johannesburg |
Page generated in 0.0014 seconds