1 Title: High-average power picosecond mid-IR source Author: Michal Vyvlečka Department: Department of Chemical Physics and Optics Supervisor: Ing. Ondřej Novák, Ph.D., Hilase centre, Institute of Physics of CAS Abstract: High average power wavelength tunable picosecond mid-IR source based on optical parametric generation (OPG) and optical parametric amplification (OPA) is being developed. The conversion system is pumped by an Yb:YAG thin-disk laser delivering 100 W of average power at 100 kHz repetition rate, 1030 nm wavelength, and 2-3 ps pulse width. Part of this fundamental beam pumps an OPG process in a PPLN crystal. The generated wavelength is determined by PPLN's poling period and temperature. Tunability of the signal wavelength between 1.46 µm and 1.95 µm was achieved, the signal beam of 20 mW was generated at 2 W of pump power, when double pass of the beams through PPLN crystal was used. The corresponding idler wavelengths were in range 2.18-3.50 μm. The signal beam was further amplified by OPA process in two KTP crystals, which was pumped by the fundamental beam. The signal beam was amplified up to 2 W at pumping of 38 W. Tuning of the output wavelength was realized by change of the phase-matching angle in KTP crystals. Tunability between 1.70-1.95 µm for signal and 2.18-2.62 µm for idler was...
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:355678 |
| Date | January 2017 |
| Creators | Vyvlečka, Michal |
| Contributors | Novák, Ondřej, Trojánek, František |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0035 seconds