The objective of this thesis is to integrate the optical waveguide and single mode fiber in a passive alignment way on a silicon bench. This technique can reduce the complexity of packaging the individual components and increase yield of the module in order to achieve the goal of the mass production. In this module, buried waveguide structure was used for light guidance. A 1.31µm semiconductor laser was used as the input light source. Light signal launched by semiconductor laser is transferred through the buried waveguide into the single mode fiber.
This module structure is consisted of two major parts, namely, the buried waveguide and the silicon bench. Buried optical Waveguide uses SO2 as the bottom cladding. Conventional photolithography procedures and etching technique were used to form a trench on the SiO2 cladding. The waveguide core was fabricated by coating the organic-inorganic hybrid materials into the trench. Finally, an organic-inorganic hybrid materials with a refractive index smaller than that of the core is used as the top cladding. The silicon benches were obtained by etching V-groove and saw-cutting U-groove on the silicon substrates for fixing the fiber. The patterning of buried waveguide and silicon V-groove were fabricated by a single optical mask procedure. Therefore accurate alignment between the waveguide and the single mode fiber can be obtained.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0615105-021629 |
| Date | 15 June 2005 |
| Creators | Hung, Sheng-Feng |
| Contributors | Pei Tien, Ann-Kuo Chu, Ju-Tah Tung, Yen Chu |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0615105-021629 |
| Rights | campus_withheld, Copyright information available at source archive |
Page generated in 0.0023 seconds