This Bachelor’s Thesis documents the process and result of an examining product development project for the Innovation and design programme at Karlstad’s University. A concept for a maintenance tool designed for a manual chainsaw has been developed. By applying the phases applied for the product design process described by Johannsson (2013), and by utilizing the knowledge from a comprehensive pre-study, a first concept was established. With a reiterative design process this concept has been developed and made into a first prototype that have been tested, evaluated and adjusted accordingly. The construction as described in chapter 2.6- Detail construction is a handheld tool with file gauges specially designed for the manual chainsaw. By using a groove for the chain at the top of the tool, it can be fixed and sharpened without any additional equipment. A prototype was made by virtual prototyping and constructed by 3D-printing. Project should proceed by implementing the changes in the prototype that was observed during testing and then evaluate that result before a manufacturing adoption.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kau-68252 |
| Date | January 2018 |
| Creators | Andersson, Patrik |
| Publisher | Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013) |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds