<p>Methodologies for the analysis and computer simulations of active optimal vibration control of complex elastic structures are considered. The structures, generally represented by a large number of degrees of freedom (DOF), are to be controlled by a comparatively small number of actuators.</p><p>Various techniques presently available to solve the optimal control problems are briefly discussed. A Parametric optimization technique that is versatile enough to solve almost any type of optimization problems is found to give poor accuracy and is time consuming. More promising is the optimality equations approach, which is based on Pontryagins principle. Several new numerical procedures are developed using this approach. Most of the problems in this thesis are analysed in the modal space. Even complex structures can be approximated accurately in the modal space by using only few modes. Different techniques have been first applied to the cases where the number of modes to control was the same as the number of actuators (determined optimal control problems), then to cases in which the number of modes to control is larger than the number of actuators (overdetermined optimal control problems). </p><p>The determined optimal control problems can be solved by applying the Independent Modal Space Control (IMSC) approach. Such an approach is implemented in the Beam Analogy (BA) method that solves the problem numerically by applying the Finite Element Method (FEM). The BA, which uses the ANSYS program, is numerically very efficient. The effects of particular optimization parameters involved in BA are discussed in detail. Unsuccessful attempts have been made to modify this method in order to make it applicable for solving overdetermined or underactuated problems. </p><p>Instead, a new methodology is proposed that uses modified optimality equations. The modifications are due to the extra constraints present in the overdetermined problems. These constraints are handled by time dependent Lagrange multipliers. The modified optimality equations are solved by using symbolic differential operators. The corresponding procedure uses the MAPLE programming, which solves overdetermined problems effectively despite of the high order of differential equations involved.</p><p>The new methodology is also applied to the closed loop control problems, in which constant optimal gains are determined without using Riccatis equations.</p>
| Identifer | oai:union.ndltd.org:USASK/oai:usask.ca:etd-09072005-172023 |
| Date | 08 September 2005 |
| Creators | Dhotre, Nitin Ratnakar |
| Contributors | Szyszkowski, Walerian, Fotouhi, Reza, Chen, X. B. (Daniel), Burton, Richard T., Boulfiza, Mohamed |
| Publisher | University of Saskatchewan |
| Source Sets | University of Saskatchewan Library |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-09072005-172023/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.002 seconds