<p dir="ltr">Precise measurement of the flowrate is crucial for both process control and energy consumption evaluation. The main aim of this work is to develop a methodology to calibrate mechanical flowmeters, designed to measure high viscosity fluids, in water. In order to accomplish this, a series of computational fluid dynamics (CFD) analysis are carried out to determine how the motion of the mechanical component varies with different flow rates of water and high viscosity fluids. This data is recorded and analyzed to develop calibration curves that relate the motion of the mechanical component the flow rates. From the calibration curves, it can be determined the required water flow rate to achieve the equivalent motion of the mechanical component in a specified viscosity. This method provides an efficient and cost-effective calibration process because it eliminates the need for calibrating using heated engine oil to achieve the fluid viscosity of the flow meter is designed. Flowmeter sensitivity analysis was also performed and it was observed that the motion of the mechanical component curves converges as the size of the flowmeter increases suggesting that the effect of viscosity on flowmeter sensitivity decreases as the size of the flowmeter is increased, likely due to reduced resistance to flow and smaller pressure drops. </p><p dir="ltr">The Kanbara Reactor ladle is a commonly used method in the steelmaking industry for hot-metal desulfurization pre-treatment. The impeller's configuration is pivotal to the reactor's performance, yet its precise function remains partially understood. This study introduces a 3-dimensional Volume-of-Fluid (VOF) model integrated with the sliding mesh technique, investigating the influence of five different impeller speeds. After Validating the model through experimental data, this numerical model is applied to investigate the typical developmental phenomena and the consequences of impeller speed variations on fluid flow characteristics, interface profile, and vortex core depth. The findings reveal that the rotational impeller induces a double-recirculation flow pattern in the axial direction due to the centrifugal discharging flow. With increasing impeller rotation speed, the vortex core depth also rises, emphasizing the substantial impact of impeller speed on vortex core depth.</p>
| Identifer | oai:union.ndltd.org:purdue.edu/oai:figshare.com:article/24813681 |
| Date | 14 December 2023 |
| Creators | Syed Imran (17637327) |
| Source Sets | Purdue University |
| Detected Language | English |
| Type | Text, Thesis |
| Rights | CC BY 4.0 |
| Relation | https://figshare.com/articles/thesis/APPLICATIONS_OF_COMPUTATIONAL_FLUID_DYNAMICS_IN_THE_INDUSTRY/24813681 |
Page generated in 0.0023 seconds