This thesis provides a contribution towards a general procedure for solving robustly and efficiently limit and shakedown analyses of engineering structures within the static approach which has been chosen for its simplicity of implementation. Throughout the thesis, attempts at improving the robustness and efficiency of the computations are presented. Beginning with efforts to prevent volumetric locking, which is a severe shortcoming of traditional low order h-type displacement elements, the investigation proposes the use of the high order p-version of the finite element method. It is shown theoretically and confirmed numerically that this p-method is not only robust in preventing locking, but also provides very accurate results. However, the use of uniformly distributed high order p-elements may be computationally demanding when the size of the problem becomes large. This difficulty is tackled by two main approaches: use of a p-adaptive procedure at the elastic computation stage and use of approximate piecewise linear yield functions. The p-adaptive scheme produces a non-uniform p-distribution and helps to greatly reduce the number of degrees of freedom needed while still guaranteeing the required level of accuracy. The overall gain is that the sizes of the models are reduced significantly and hence also the computational effort. The adoption of piecewise linear yield surfaces helps to further increase the efficiency at the expense of possibly slightly less accurate, but still very acceptable, results. State-of-the-art linear programming solvers based on the very efficient interior point methodology are used. Significant gains in efficiency are achieved. A heuristic, semi-adaptive scheme to piecewise linearize the yield surfaces is then developed to further reduce the size of the underlying optimization problems. The results show additional gains in efficiency. Finally, major conclusions are summarized, and various aspects suitable for further research are highlighted.
| Identifer | oai:union.ndltd.org:ADTP/188106 |
| Date | January 2005 |
| Creators | Ngo, Ngoc Son, Civil & Environmental Engineering, Faculty of Engineering, UNSW |
| Publisher | Awarded by:University of New South Wales. Civil and Environmental Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Ngoc Son Ngo, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0022 seconds