This doctoral research was realized within the frame of the SMARTNET Project which aimed at developing coatings to improve the cleanability of stainless steel, targeting open surface applications.
Throughout this thesis, the radial-flow cell was selected to study the removal of different soils due to its ability to generate well-controlled wall shear stress distributions on the investigated surfaces. Model surfaces were selected for their different physico-chemical and mechanical properties to study the interactions between the soils and the surfaces in detail.
A thin layer chromatography sprayer giving a narrower and more reproducible droplet sizes distribution was preferred to mimic splashing and produce controlled spatters. The first experimental campaign involving oil droplets showed that the analytical models available to relate the detachment radius with the critical wall shear stress (minimal wall shear stress required for soil detachment) and the soil adhesion strength in the radial flow cell could only be applied for weakly adherent soils for which removal occurs below 3 Pa, due to the complex hydrodynamics near the inlet.
Consequently, the flow inside the radial-flow cell has been characterized using computational fluid dynamics over the whole inlet laminar regime and validated experimentally. Studying the adherence of starch granule aggregates in the radial-flow cell revealed that the conversion of critical radius into critical wall shear stress may be biased when the adhering aggregate height is not negligible with respect to the channel height and when the adherence is such that flow rates above creeping flow conditions are required
for soil detachment.
The influence of several environmental factors and substrate properties was then examined to improve the understanding of the mechanisms affecting soiling and cleanability. By influencing droplet spreading and competition between capillary forces at the granule-substrate and granule-granule interfaces, substrate wettability affects the shape and compactness of the adhering aggregates, the efficiency of shear forces upon cleaning, and finally the adherence of soiling particles. Macromolecules originating from the starch granules suspension are adsorbed on the substrate from the liquid phase or carried by the retracting film and
accumulated at the granule-substrate interface. They influence granule adherence by acting as an adhesive
joint, the properties of which seem to be influenced by the detailed history of drying and exposure to humidity.
On compliant substrates, the aggregate-substrate interactions induce stresses at the granule-substrate interface which may lead to substrate deformation and promote a more intimate contact between the granules and their substrate, thereby appreciably increasing adherence.
| Identifer | oai:union.ndltd.org:BICfB/oai:ETDFUSAGx:FUSAGxetd-06162009-195124 |
| Date | 23 June 2009 |
| Creators | Detry, Jean |
| Contributors | Blecker, Christophe, Schmitz, P., (INSA-GBA-LISBP Toulouse France), Rouxhet, P., (UCL), Sindic, Marianne, Lognay, Georges, Paquot, Michel, Théwis, André, Deroanne, Claude |
| Publisher | Universite de Gembloux |
| Source Sets | Bibliothèque interuniversitaire de la Communauté française de Belgique |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://bictel-fusagx.ulg.ac.be/ETD-db/collection/available/FUSAGxetd-06162009-195124/ |
| Rights | unrestricted, Je certifie avoir complété et signé le contrat BICTEL/e remis par le gestionnaire facultaire. |
Page generated in 0.0017 seconds