High Power Impulse Magnetron Sputtering (HiPIMS) comes as a new and promising PVD method for the development of high-performance coatings for cutting applications. This technique utilizes high energy and ionization which can produce a denser and stronger ceramic in comparison to traditional deposition techniques. Important coating characteristics that arise from this method such as enhanced hardness, adhesion, and less defects, can be applied when machining hard-to-cut materials. In this study, investigation of tool life and wear mechanisms, mechanical and physical properties of AlTiN coatings deposited on carbide tools by HiPIMS and Cathodic Arc Evaporation (CAE) were analyzed when machining Inconel 718 and Stainless Steel 304. Experimental turning tests were performed to evaluate tool life, and the wear mechanisms were analyzed by optical and scanning electron microscopy. Nanohardness, scratch test, fracture toughness and other methods were carried out to evaluate the coating properties. Impedance experiments were performed to determine the coating porosity and resistance to corrosion.
The results showed that HiPIMS coating presented higher hardness, toughness to fracture and adhesion to the substrate in comparison to CAE coatings. The HiPIMS coated tool substantially improved tool life when machining Inconel. The dominant wear mechanism found was abrasion, which is induced by the presence of hard carbides. The main wear patterns observed were flank, notch, and crater wear. The tool performance of HiPIMS was found to have enhanced mechanical properties, lower porosity, and form a larger amount of tribo-oxides when machining, in comparison to CAE. / Thesis / Master of Applied Science (MASc)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/26177 |
| Date | January 2020 |
| Creators | Reolon, Luca |
| Contributors | Veldhuis, Stephen, Mechanical Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0018 seconds