This master thesis has been written to develop a new pipe support for pipe systems in the process industry. The purpose was to relieve pumps or other sensitive equipment from elevated forces or moments that may cause failure. The elevated forces or moments occur due to the weight of the piping, the weight of the medium and expansion due to elevated temperatures. The support is mainly designed to be implemented in a 90 degree bend but they can also be implemented in straight pipes with small adjustments of the attachment between the support and the pipe. Six different complete concepts were developed and put through different elimination matrices and evaluated against a requirement specification. The final design was calculated to withstand the forces and moments from a worst case scenario. The concept is in need of further development and testing before it can be implemented in projects. It is necessary to investigate if the clamps can withstand the working load in the new design. The concept should also be tested possibly by a prototype.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kau-44338 |
| Date | January 2016 |
| Creators | Påhlsson, Carl |
| Publisher | Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013) |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.002 seconds