This diploma thesis deals with the optimization of microclimate of an industrial building. There is required constant temperature with minimal fluctuations during manufacturing process in the building. Due to insufficient cooling power of air-conditioning system was objective to design a solution that ensures stability of internal temperature during production especially in summer and simultaneously should be the solution economically acceptable. Simulation shows original state defined problems. Some new or unusual materials for solar shading are reviewed in the thesis by the experimental measurements and by the comparative method. To each material is assigned shading coefficient according to Czech standards, thereby is achieved universality for calculations of heat gains resulting from solar radiation. By one part of the experiments and their evaluation is determined thickness of the standard single glass glazing. It is also determined proportional transmittance of solar radiation for certain multiwall polycarbonates, which are currently used as fillers of industrial skylights and production hall‘s window openings. From experiments resulting design is subjected to the simulation. Comparison of temperatures is shown for the time before the installation of designed solar shading and after the installation of the solar shading.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:227487 |
| Date | January 2015 |
| Creators | Tůmová, Eliška |
| Contributors | Gebauer, Günter, Šikula, Ondřej |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds