Abstract
Traditional unipolar/bipolar plates, such as the metal and the graphite unipolar/bipolar plates, are expensive, weight heavy and volume large, so that it is hard to be used in the portable application. A high efficiency, low cost and lightweight portable proton exchange membrane fuel cell (called PEMFC or called HFC when using pure hydrogen fuel), which is made with a new heterogeneous composite carbon fiber bipolar plate and a MEA, is developed in our lab. There are many advantages of the new carbon fiber unipolar/bipolar plates, such as low contact resistance, low cost, lightweight and small volume. We hope that the new unipolar/bipolar plate will be able to replace the conventional metal and graphite unipolar/bipolar plates in the future.
The characteristics of a portable PEMFC in different operational conditions are studied in this research. From our experimental result, we find that the factors which affect the HFC performance include the gas temperature, humidity ratio, inlet gas pressure in anode, the geometry of inlet ports, the flow channels within cell, and the oxidant flow rate etc. In addition, the contact resistances between different materials within each cell all strongly influence HFC performance.
The ribs of the carbon fiber unipolar/bipolar plates is pored structure, and the gas diffusion layer is no deformation because of only slight compression in stack assembly; therefore, the reactive gas can easily flow into the most of active area. In addition, the contact resistance between the carbon fiber unipolar plate and the gas diffusion layer is lower than that between the traditional unipolar plate and the gas diffusion layer, so that the electrons in active layer is easily to exit or enter this region. The experimental result at 1.15 atm and 40 oC displays that the current density with the new unipolar plate is about twice higher than that with the graphite unipolar plate at overpotential 0.6 V.
With air as an oxidizer, we find that increasing the fan rotation speed can avoid output-voltage decay in high current density, but the design with fan is unfavorable for portable application. So a front open unipolar plate and air-breathing design is adopted on the cathode. The power density of this design is slightly lower than that with fan, but it still can reach a value 160 mW/cm2 without any heating and humidification in the anode. Because this design needs little supplement device, the application in portable fuel cells of the new design will be wider than that of a traditional design.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0714104-143100 |
| Date | 14 July 2004 |
| Creators | He, Jheng-ru |
| Contributors | Ming-san Lee, Long-jeng Chen, Chorng-Fuh Liu, Jin-jia Su |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0714104-143100 |
| Rights | off_campus_withheld, Copyright information available at source archive |
Page generated in 0.0018 seconds