Thesis advisor: Zhifeng Ren / Thermoelectrics, as one promising approach for solid-state energy conversion between heat and electricity, is becoming increasingly important within the last a couple of decades as the availability and negative environmental impact of fossil fuels draw increasing attention. Therefore, various thermoelectric materials in a wide working temperature range from room temperature to 1000 degrees Celsius for power generation or below zero for cooling applications have been intensively studied. In general, the efficiency of thermoelectric devices relies on the dimensionless figure-of-merit (ZT) of the material, defined as ZT=(S<super>2</sup>σ)T/κ, where S is the Seebeck coefficient, [sigma] the electrical conductivity, [kappa] the thermal conductivity (sum of the electronic part, the lattice part, and the bipolar contribution at high temperature region), and T the absolute temperature during operation. Techniques to measure those individual parameters will be discussed in the 2nd chapter while the 1st chapter mainly covers the fundamental theory of thermoelectrics. Recently, the idea of using various nanostructured materials to further improve the ZT of conventional thermoelectric materials has led to a renewed interest. Among these types of nanostructured materials, nanocomposites which mainly denote for the nano-grained bulk materials or materials with nano-sized inclusions are the major focus of our study. For nanocomposites, the enhancement in ZT mainly comes from the low lattice thermal conductivity due to the suppressed phonon transport by those interfaces or structure features in the nanometer scale without deteriorating the electron transport. In the last few years, we have successfully demonstrated in several materials systems (Bismuth Telluride, Skutterudites, Silicon Germanium) that ball milling followed by hot pressing is an effective way for preparing large quantities of those nanocomposite thermoelectric materials with high ZT values in the bulk form. Therefore, in the 3rd part of this thesis, I will talk about how I applied the same technique to the Thalllium (Tl) doped Lead Telluride (PbTe) which was reported for an improved Seebeck coefficient due to the creation of resonant states near the Fermi level, leading to a high ZT of about 1.5 at around 500 degrees Celsius. I showed that comparing with conventional tedious, energy consuming melting method, our fabrication process could produce such material with competing thermoelectric performance, but much simpler and more energy effective. Potential problems and perspectives for the future study are also discussed. The 4th chapter of my thesis deals with the challenge that in addition to those nanostructuring routes that mainly reduce the thermal conductivity to improve the performance, strategies to enhance the power factor (enhancing [sigma] or S or both) are also essential for the next generation of thermoelectric materials. In this part, modulation-doping which has been widely used in thin film semiconductor industry was studied in 3-D bulk thermoelectric nanocomposites to enhance the carrier mobility and therefore the electrical conductivity [sigma]. We proved in our study that by proper materials design, an improved power factor and a reduced thermal conductivity could be simultaneously obtained in the n-type SiGe nanocomposite material, which in turn gives an about 30% enhancement in the final ZT value. In order to further improve the materials performance or even apply this strategy to other materials systems, I also provided discussions at the end of chapter. In the last chapter, the structural and transport properties of a new thermoelectric compound Cu<sub>2</sub>Se was studied which was originally regarded as a superionic conductor. The [beta]-phase of such material possesses a natural superlattice-like structure, therefore resulting in a low lattice thermal conductivity of 0.4-0.5 Wm<sup>-1</sup>K<sup>-1</sup> and a high peak ZT value of ~1.6 at around 700 degrees Celsius. I also studied the phase transition behavior between the cubic [beta]-phase and the tetragonal [alpha]-phase of such material from the discontinuity of transport property curves and the change in crystal structure. In addition, I also talk about the abnormal decrease in specific heat with increasing temperature that I observed in the as-prepared Cu<sub>2</sub>Se samples. I suggest this material is of general interest to a broad range of researchers in Physics, Chemistry, and Materials Science. / Thesis (PhD) — Boston College, 2012. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Physics.
| Identifer | oai:union.ndltd.org:BOSTON/oai:dlib.bc.edu:bc-ir_101791 |
| Date | January 2012 |
| Creators | Yu, Bo |
| Publisher | Boston College |
| Source Sets | Boston College |
| Language | English |
| Detected Language | English |
| Type | Text, thesis |
| Format | electronic, application/pdf |
| Rights | Copyright is held by the author, with all rights reserved, unless otherwise noted. |
Page generated in 0.002 seconds