This thesis is concerned with the appropriate design of manufacturing technology for plastic program disc including the design of plastic printing technology. At the beginning of this thesis was made an analysis of requirements for manufactured device including selection of the most appropriate technology for its manufacturing – plastic injection. In the theoretical part are described all skills needed for designing and construction of the injection mould. Partial theoretical parts are concerned with the issue of plastic materials, tools and engines for injection, and of plastic printing technology. Practical part is concerned with description of design of each single system inside the injection mould including calculation. On the basis of these calculations was selected the appropriate injection engine. The end of the practical part is concerned with the selection of the appropriate engine for printing on the plastic device which is manufactured by the technology of plastic injection. For construction of the injection mould were applied normalities of the Hasco Company and the 3D CAD system Solidworks. The conclusion of this thesis achieves the technical- economical evaluation for manufacturing of designed plastic device.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230863 |
| Date | January 2013 |
| Creators | Gráf, Radomír |
| Contributors | Kebrle, Ondřej, Kandus, Bohumil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds