Return to search

Open water testing of a surface piercing propeller with varying submergence, yaw angle and inclination angle

The use of surface piercing propellers (SPPs) shows promise for high speed operation by virtually eliminating appendage drag, which can be as much as 30 percent of the total drag on a vehicle at high speeds. The scarcity of available systematic test data has made reliable performance prediction difficult. The primary objective of this research is to obtain experimental performance prediction data that can be used in SPP design. In a series of open water tests in a non-pressurized towing tank facility, force transducer measurements were taken at tip immersion ratios from 0.5 to .33, yaw angles from 0° to 30° and inclination angles from 0° to 15° over a range of advance ratios from 0.8 to 1.8. Force transducer measurements were taken for thrust, torque, side forces and moments. These results will help develop a baseline for the verification of SPP performance prediction. / by Justin M. Lorio. / Thesis (M.S.C.S.)--Florida Atlantic University, 2010. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2010. Mode of access: World Wide Web.

Identiferoai:union.ndltd.org:fau.edu/oai:fau.digital.flvc.org:fau_3000
ContributorsLorio, Justin M., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
PublisherFlorida Atlantic University
Source SetsFlorida Atlantic University
LanguageEnglish
Detected LanguageEnglish
TypeText, Electronic Thesis or Dissertation
Formatxi, 154 p. : ill. (some col.), electronic
Rightshttp://rightsstatements.org/vocab/InC/1.0/

Page generated in 0.0016 seconds