Return to search

Improved performance characteristics of induction machines with non-skewed symmetrical rotor slots

Induction machines convert more than 55% of electrical energy into various other forms in industrial and domestic environments. Improved performance, especially by reduction of losses in induction machines hence can significantly reduce consumption of electricity. Many design and control methods are adopted to make induction machines work more efficiently, however certain design compromises are inevitable, such as skewing the rotor to improve the magnetic noise and torque characteristics increase the cross current losses considerably in a cage rotor, degrading the efficiency of the motor. Crosscurrent losses are the dominating stray losses which are dependent on several factors among them are percentage skew and the contact resistance between the rotor bars and laminations. It is shown in this thesis that implementing a design change which has non-skewed asymmetrical distribution of rotor slots can serve the same purpose as skewing i.e., reduction of the magnetic noise, thereby avoiding the negative effects of skewing the rotor slots especially by reducing the cross-current losses. Two design ethodologies to introduce asymmetry in rotor slots are proposed and the key performance characteristics like torque ripple, radial air gap forces are computed both numerically and analytically. Radial forces obtained from the finite element method are coupled to the analytical tool forcalculating the magnetic noise. A spectral method to calculate and separate the radial forces into vibration modes and their respective frequencies is proposed and validated for a standard 4-pole induction motor. The influence of rotor slot number, eccentricity and skew on radial forces and magnetic noise are studied using finite element method in order to understand the vibrational and acoustic behavior of the machine, especially for identifying their sources. The validated methods on standard motors are applied for investigating the asymmetrical rotor slot machines. Radial air gap forces and magnetic noise spectra are computed for the novel dual and sinusoidal symmetrical rotors and compared with the standard symmetrical rotor. The results obtained showed reduced radial forces and magnetic noise in asymmetrical rotors, both for the eccentric and noneccentric cases. Based on the results obtained some guide lines for designing  asymmetrical rotor slots are established. Magnitudes of the harmful modes of vibration observed in the eccentric rotors, which usually occur in reality, are considerably reduced in asymmetrical rotors showing lower sound intensity levels produced by asymmetrical rotors. The noise level from mode-2 vibration in a 4-pole standard 15 kW motor running with 25% static eccentricity is decreased by about 6 dB, compared to the standard rotors. Hence improved performance can be achieved by removing skew which reduces cross current losses and by employing asymmetrical rotor slots same noise level can be maintained or can be even lowered. / QC 20110221

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-11510
Date January 2009
CreatorsChitroju, Rathna
PublisherKTH, Elektriska maskiner och effektelektronik, Stockholm : KTH
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeLicentiate thesis, monograph, info:eu-repo/semantics/masterThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationTrita-EE, 1653-5146 ; 2009:043

Page generated in 0.0031 seconds