Background: An intermediate step towards fully autonomous construction equipment is “assisted tele-remote operation”. These sorts of operations imply that an operator remotely supports machines that has encountered a situation that autonomous systems onboard the construction machines (CM) cannot solve. Considering teleoperators are not required to continuously monitor the CM in an assisted tele-remote environment, multiple construction machines can be teleoperated simultaneously. For simplification, “assisted tele-remote operation” will now be referred to as “teleoperations”. Volvo Construction Equipment is currently exploring the possibility to teleoperate wheel loaders, articulated haulers, and excavators from a single platform. To do this, primary controls adapted for operating these machines are needed. The primary controls should be designed with the needs of a teleoperator in mind while taking functionality into account, which is needed when CM are both operated conventionally and in tele-remote applications. This procedure will be referred to as relevant primary controls. As the primary controls from three different CM-types are destined to be combined into one platform, the teleoperations platform will be referred to as “3-1 CM teleoperations platform”. The purpose of this thesis project was to propose a relevant solution to primary controls for a 3-1 CM teleoperations platform. To fulfil this purpose, the following two research questions (RQ) where formulated: • RQ1: What are the challenges for teleoperating construction equipment? • RQ2: What defines primary controls in a 3-1 CM teleoperations platform and how can the layout be improved? Method: Using interviews, observations, and literature as qualitative data collection methods, several insights where gained. A scenario for the CM was defined to define the situation in which the quantitative data collection method would be performed. Needs of current CM operators combined with teleoperators have been analysed and listed. Quantitative data has been collected and analysed to design the layout of the primary controls using the objective data as a basis. Result: The research questions were answered with the following results: • RQ1: Insights that resulted in several themes describing how teleoperations can be developed by looking at different challenges it can face. • RQ2: Specifications of the functions included in the new ‘primary controls’ based on CM functions from the company and from teleoperating experiences from several industries. An analysis on how often the functions for the new ‘primary controls’ were used, was carried out. The answers to the research questions were used as a basis to fulfil the purpose of this thesis project by proposing a conceptual solution for primary controls to a teleoperation’s platform for operating multiple CM. Conclusions: It was established that a 3-1 CM teleoperations platform can be developed towards certain CE-machine types. Moreover, additional analysis with experienced operators of each machine type are needed to improve and verify the most optimal layout of the primary controls and platform. Further research is still required to validate the answers to RQ1 and RQ2.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:mdh-49372 |
Date | January 2020 |
Creators | Andersson, Ingo, Garbers, Joel |
Publisher | Mälardalens högskola, Akademin för innovation, design och teknik, Mälardalens högskola, Akademin för innovation, design och teknik |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0028 seconds