This master’s thesis first deals with the theory concerning induction motor. It briefly desbribes the construction of three-phase induction motors, the generation of tractive force, power flow with loss distribution and also torque characteristic. In the next part an analytical calculation of the parameters of equivalent circuit for an existing induction motor with known dimensions is performed. After the calculation it is possible to find out the rated parameters of the motor, which makes it possible to further compare results with the values obtained by other methods. The next step was to create a model of the motor in RMxprt program, which is later also translated to ANSYS Maxwell 2D model. Simulations were carried out in both interfaces. As the next step the results obtained by the three methods are compared with measured values and also evaluated. The final part of the thesis focuses on the optimization of the magnetic circuit for higher frequencies. Efficiency of the modified induction motor is examined for higher frequencies using RMxprt Optimetrics and this procedure is performed for both default and alternative electrical steel materials.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:399567 |
| Date | January 2019 |
| Creators | Binek, Martin |
| Contributors | Cipín, Radoslav, Vítek, Ondřej |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds