At the Torpshammar dam two rectangular beams are situated upstream of the spillway gates to stabilize the sidewalls holding the embankment of the dam. A computational fluid dynamics (CFD) simulation of the dam with the bottom outlets open was made to investigate how the flow and discharge capacity is affected by the beams. The results can be used to avoid unexpected consequences due to turbulence caused by the beams, make the beams strong enough to hold the pressure from the flow and get an estimation of the discharge capacity with the beams. Turbulence is one of the hardest things to simulate so the results were compared with previous simulation work made without the beams and physical model tests to validate the results. Also, a sensitivity analysis was made to investigate the method used. The beams lowered the velocity (to 17 m/s) and the discharge capacity (to 255 m3/s) compared to the previous work. The force on the beams was directed upward and downstream. The beams increased the turbulence and the vortex shedding frequency was higher for the beam closest to the outlet. The velocity and discharge capacity differed with 6 % compared to model test results. The results can therefore only be used as an estimation, a more detailed computational model and more computational cells are needed to get a better result. The sensitivity analysis showed that the velocity and turbulence depend on the method and further studies need to be made to decide which method gives the closest similarity with reality.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-369319 |
Date | January 2018 |
Creators | Wallin, Adéle |
Publisher | Uppsala universitet, Elektricitetslära |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | UPTEC F, 1401-5757 ; 18056 |
Page generated in 0.0018 seconds