Return to search

Modelling of Biomass Pyrolysis with Ex-situ Catalytic Upgrading for Bio-crude Production

This study presents a techno-economic assessment of slow pyrolysis of pine sawdust continued by ex-situ catalytic upgrading. The overall process consists of six sections: feed drying, pyrolysis, vapor filtration, ex-situ catalytic upgrading, vapor quenching, and combustion of permanent gas. In the process simulation, biomass is objected to slow pyrolysis at 450ºC in an electrically-heated screw reactor and pyrolysis vapors is upgraded in fixed catalytic bed reactor at 425 ºC (using HZSM-5). The model is then used to investigate effects of feed moisture variation and type of heating source in pyrolysis unit, i.e. thermal vs. electrical heating, to oil energy efficiency. According to the simulation model, the endothermic pyrolysis step requires1.46 MJ/kg dry-feed. On the other hand, ex-situ upgrading is slightly exothermic and releases50kJ/kg dry-feed. Overall, the conversion of biomass to bio-oil demonstrates a mass efficiency of 19.65%wt and an energy efficiency of 29.10%. The energy efficiency raises to 32.81% if a direct thermal source is applied instead of electrical heating. The bio-oil energy efficiency increases by 1.38% if the moisture content of the biomass decreases by 10%wt. In average,bio-oil and char production in ex-situ catalytic upgrading generate profit 1.47 SEK/kg dry feed. The uncertainty of bio-oil price causes the highest profit variation.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-231489
Date January 2018
CreatorsNugrahany, Febryana
PublisherKTH, Materialvetenskap
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationTRITA-ITM-EX ; 2018:762

Page generated in 0.0067 seconds