<p>Firstly, select a nozzle and get all its parameters like spray angle, mass flow rate, dipersion angle and nozzle diameter. Create a domain in which 2 nozzles can fit, as shown in thesis. Divide the domain in 2 zones and perform fine mesh on the top surface of solid surface where spray will heat. Write a function for slab temperature variation and give it as the solid part input. Use DPM model, to create injectors inside the domain and solve.</p>
| Identifer | oai:union.ndltd.org:purdue.edu/oai:figshare.com:article/22766273 |
| Date | 04 May 2023 |
| Creators | Ninad Sandeep Patil (15412307) |
| Source Sets | Purdue University |
| Detected Language | English |
| Type | Text, Thesis |
| Rights | CC BY 4.0 |
| Relation | https://figshare.com/articles/thesis/SPRAY_OVERLAP_AND_HEAT_TRANSFER_COEFFICIENT_UNIFORMITY_IN_CONTINUOUS_CASTING/22766273 |
Page generated in 0.0019 seconds