An important part of an aerodynamic design process is optimizing designs to maximize quantities such as lift and the lift-to-drag ratio, in a process known as shape optimization. It is the goal of this thesis to develop and apply understanding of mixed finite element method and sensitivity analysis in a way that sets the foundation for shape optimization. The open-source Incompressible Flow Iterative Solution Software (IFISS) mixed finite element method toolbox for MATLAB developed by Silvester, Elman, and Ramage is used. Meshes are produced for a backward-facing step problem, using built-in tools from IFISS as well as the mesh generation software Gmsh, and grid convergence studies are performed for both sets of meshes along a sampled data line to ensure that the simulations converge asymptotically with increasing mesh resolution. As a preliminary study of sensitivity analysis, analytic sensitivities of velocity components along the backward-facing step data line to inflow velocity parameters are determined and verified using finite difference and complex step sensitivity values. The method is then applied to pressure drag calculated by integrating the pressure over the surface of a circular cylinder in a freestream flow, and verified and validated using published simulation data and experimental data. The sensitivity analysis study is extended to shape optimization, wherein the shape of a circular cylinder is altered and the sensitivities of the pressure drag coefficient to the changes in the cylinder shape are determined and verified. / Master of Science / When looking at designing an aircraft, it is important to consider the forces air flow exerts on the wings. The primary forces of interest for aerodynamic analysis are lift, which generally acts upward perpendicular to the flow of air, and drag, which opposes the motion of the wing through the air. Optimization is the process of developing a design in such a way that a specific quantity, such as lift or drag, is either maximized or minimized. Many methods exist of predicting the behavior of air flow, and various methods of optimization exist which take already existing predictive software and progressively alter the design to try to meet the minimized or maximized objective. This thesis outlines a multi-step effort to modify an open source software such that it could be used for design optimization.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/78362 |
| Date | 18 July 2017 |
| Creators | Turner, Aaron Michael |
| Contributors | Aerospace and Ocean Engineering, Patil, Mayuresh J., Roy, Christopher J., Canfield, Robert A. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0026 seconds