This thesis investigated the monitoring and analysis of signals related to the vibration of large rotary blasthole drills. The research focused on a machine with electric drilling actuators: such machines are used as primary production equipment in the drill‐and‐blast cycle of the surface
(open‐pit) mining process. The performance of such machines is limited by the onset of severe vibrations, which can arise due to the interaction of geology, bit, drill string, machine structure, and control settings. Experimental data for the thesis were obtained during field periods at an
iron ore mine in Minnesota’s Mesabi Iron Range. The data acquisition and signal analysis techniques which were utilized are presented, including smoothing of signals and calculated variables such as specific energy. Ambient vibration sources and vibration aliasing issues are investigated. Results from analyzing structural response tests indicate that, as expected, the
natural frequency of the drill mast decreases with increasing bit depth – although the mounting position of accelerometers distorts this trend. The pull down force (weight on bit) is shown to
have no appreciable impact on the mast’s natural frequency, nor on the mast’s damping ratio. A strong relationship between rotary speed and the dominant vibration frequency peaks at 3x and 6x rotary speed is demonstrated, and a physical explanation of the 6x vibration peak is postulated. The rotary motor current is shown to consistently exhibit frequency peaks at 3x and 6x rotation speed, indicating that this variable is a good candidate for use either as a substitute for accelerometer feedback, or as an auxiliary signal to detect down‐the‐hole vibration when it is not manifested by the mast mounted accelerometers. System identification is used to demonstrate that the dynamic relationship between vibration and rotary current, while it can be modeled locally, varies with depth and geology and hence is essentially a time‐varying process. This results in the amplitude of rotary current not being usable as a proxy for vibration
amplitude. Nonetheless, it is demonstrated that the root‐mean‐square (RMS) of the low
frequency current oscillations, in a nonlinear combination with the RMS of the current signal as a whole, may be able to serve as a proxy for the RMS of the vibration signal. / Thesis (Master, Mechanical and Materials Engineering) -- Queen's University, 2010-09-27 12:15:07.644
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OKQ.1974/6101 |
Date | 27 September 2010 |
Creators | Branscombe, Edward A. |
Contributors | Queen's University (Kingston, Ont.). Theses (Queen's University (Kingston, Ont.)) |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | English, English |
Detected Language | English |
Type | Thesis |
Rights | This publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner. |
Relation | Canadian theses |
Page generated in 0.0015 seconds