The objective of this thesis is to implement a basic, yet realistic, ESC system into the VTI simulator environment. This system is then validated to assure that it is working properly and provides a realistic behavior. The implemented ESC system is used in a study, where the ESC system could be turned on and off, to evaluate the benefits of an ESC system after a side impact. This study shows that an ESC system may aid the driver in such a critical situation when the driver is unaware that a side impact will occur. With the ESC system active no driver lost control while with the system inactive there were five drivers that lost control, but deviations in initial speed give statistical difficulties, thus more tests are needed. In the case where the driver knows that an impact will occur the ESC system showed to stabilize the automobile faster and it is shown that an expected improvement in stabilization time is between 40 to 62 percent. It was also seen during this part of the scenario that 2 percent loss of control occurred with an active ESC system and 45 percent without.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-17791 |
| Date | January 2009 |
| Creators | Andersson, Anders |
| Publisher | Linköpings universitet, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0023 seconds