Return to search

Arthrodesis of the Proximal Interphalangeal Joint in the Horse: A Biomechanical Comparison of 5.5mm Cortical Screw Augmented 4.5mm Narrow LCDCP And 5.0mm LCP Constructs With and Without Distal Interphalangeal Joint Collateral Ligament Transection

The in vitro comparison of monotonic and cyclic mechanical properties of equine proximal interphalangeal joint arthrodeses stabilized using an open or closed technique and application of 2 abaxial transarticular lag screws combined with either an axial 4.5mm narrow 3-hole LC-DCP with 5.5mm cortical screws a 4.5mm narrow 3-hole LCP with 5.0mm locking screws. Limbs were tested for cyclic fatigue at 20,0000cycles and then in single-cycle to failure under 3-point, dorsopalmar bending. There were no significant differences in stiffness and single-cycle to failure values between the LCP and LC-DCP constructs, with or without PIPJ collateral ligament transaction. There was no interaction between the open and closed techniques, nor between plate types on force or stiffness at failure.

Identiferoai:union.ndltd.org:MSSTATE/oai:scholarsjunction.msstate.edu:td-1728
Date17 August 2013
CreatorsRocconi, Richard A
PublisherScholars Junction
Source SetsMississippi State University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceTheses and Dissertations

Page generated in 0.0019 seconds