Return to search

Design and Implementation of Four-quadrant Operation in Single-Switch Based Switched Reluctance Motor Drive System

In step with development of advanced, cost effective semiconductors and electrical motor drive components, the Switched Reluctance Machine (SRM) has become the center of public attention. Interest in a single-phase SRM has arisen in many places, especially because of its low cost applications. However, some drawbacks have plagued single-phase SRM: the lack of self-starting capability and restricted operation conditions.

This thesis presents a four-quadrant operation SRM drive system with a single controllable switch for two phase configuration. The SRM's configuration has four main stator poles, four rotor poles, and four auxiliary stator poles. Because of this special arrangement, a four-quadrant operation with a given power converter topology and proposed control algorithms has been realized. The focus of the paper is to realize a four-quadrant operation with a single-switch converter based SRM. In addition, this research resulted in a new self-starting scheme without adding permanent magnets. Simulation results and experimental results utilizing the control algorithm verify the performance of the system. / Master of Science

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/33985
Date27 July 2004
CreatorsPark, Sung Yeul
ContributorsElectrical and Computer Engineering, Ramu, Krishnan, Lindner, Douglas K., Stilwell, Daniel J.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis
Formatapplication/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
Relationsupark_thesis.pdf

Page generated in 0.0022 seconds