Return to search

Hur tvätt påverkar stickade elektriska ledningsbanor : En studie om korrelation mellan resistans, kontaktimpedans och böjstyvhet efter tvätt / The impact of laundry on knitted conductive tracks

Smarta textilier och e-textilier har, sedan de först började forskas på, haft ett potentiellt användningsområde inom sjukvården, för att användas inom långtidsövervakning av sjuka. Det största hindret som har upptäckts är, förutom att det finns vissa svårigheter med stabiliteten på signalerna från textilierna och att signalerna kan störas av brus, är att de har varit svåra att tvätta. De elektriskt ledande materialen har antagits förstörda av värmen, kemikalierna och det mekaniska arbetet från tvätten. Den här studien fokuserar på hur ledningsbanorna reagerar över lag på tvätt, och om det finns något samband mellan de olika mätmetoderna. Denna rapport testar två olika bindningar för att tillverka en stickad elektrisk ledningsbana, där en ledningsbana ligger exponerad och en ligger isolerad i bakgrundstyget. Flera olika bredder på ledningsbanan tillverkas för att undersöka om det finns någon skillnad mellan dem. Genom att testa resistansen på ledningsbanan, kontaktimpedansen mellan hud och elektrod, och böjstyvheten på fibrerna från det ledande garnet med hjälp av en FAVIMAT+ från TexTechno innan någon tvätt hade utförts, och sedan var femte tvätt upp till 30 tvättar, kan förändringen följas över en längre tid. Med de resultat som samlades in utfördes en ANOVA för varje mätmetod. Sedan utfördes flera korrelationstester, däribland SpearmanRho tester och även ett program för att anpassa en kurva till mätvärdena användes. De resultat som studien kom fram till pekar på att det inte finns något samband mellan ökningen av resistans och ökningen av kontaktimpedans. Resultaten från böjstyvheten var för brusiga för att några slutsatser skulle kunna dras. Det visar sig även att en bredare ledningsbana, och den bindning som isolerade ledningsbanan presterade bättre och hade en mindre ökning över tid än vad de smalare och exponerade ledningsbanorna hade. / Smart textiles and e-textiles have since they first started being researched had a potential to be used in the medical field to monitor sick people over a longer time. The biggest obstacle for the implementation of the smart textiles, except for the difficulty in getting a stable and clean signal, is the conductive yarns inability to handle being washed. The conductive yarn is thought to lose its conductivity due to the heat, chemicals and mechanical work it is exposed to during the wash. The focus of this study is how the conductive tracks react to washing, and if there is any correlation between the different methods of measuring. This report will test two different patterns for creating a knitted conductive track, one where the track will be exposed on the surface of the fabric, and one where it will be isolated between layers of the fabric. Different widths of the track will be tested to see if there is any difference between them. By measuring the resistance of the conductive track, the contact impedance between the skin and electrode and the bending stiffness of the fibers of the conductive yarn before any washes had been carried out, and then after every fifth wash, up to 30 washes, it was possible to track the changes over a longer period. With the results that were collected, an ANOVA was carried out for each of the testing methods. Thereafter several correlation tests were carried out, among others a SpearmanRho and a program that tried to fit a curve to the data points. The results that the study concluded were that there was no correlation between the increase in resistance and the increase of the contact impedance. The results from the bending stiffness were too inconclusive for any conclusions to be made. It also showed that a wider track and the pattern that isolated the track performed better than the thinner tracks and the pattern that exposed the track. The wider isolated track had lower increase of resistance over time that the thin exposed tracks had.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hb-32201
Date January 2024
CreatorsBergström, Malva Cerne
PublisherHögskolan i Borås, Akademin för textil, teknik och ekonomi
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.3132 seconds