This paper describes an investigation into the fabrication of absorber layer CuInSe2 films by co-evaporation process. And we used the stainless steel substrates to manufacture Al / ZnO:Al /ZnSe(CdS) / CuInSe2 / Mo /SiO2 / Stainless Steel(SS) flexible thin-film solar cell.
In this study, we fabricated the main absorber layer CIS thin film by co-evaporation process including two steps, and CIS thin films parameters were estimated by sheet resistance. Under one-sun (AM1.5,100mW/cm2) conditions solar simulator, we compared the solar cell with different thickness of absorber layer, co-evaporation process and composition to improve solar cell performance.
The energy conversion efficiency of the CIS thin-film solar cell (Al/ AZO/ CdS /CIS/Mo/ SLG) was 4.5¢M(Voc =0.38 V¡AJsc = 30.5 mA ¡AFF = 38.6 ¢M), flexible solar cell (Al/AZO/CdS/CIS/Mo/SiO2/SS) was 2.6%( Voc =0.2 V¡AJsc = 41.7 mA ¡AFF = 31.2 %).
Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0730108-165625 |
Date | 30 July 2008 |
Creators | Sun, Yu-Xiang |
Contributors | Der-Shin Gan, Bae-Heng Tseng, Mau-Phon Houng |
Publisher | NSYSU |
Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
Language | Cholon |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0730108-165625 |
Rights | not_available, Copyright information available at source archive |
Page generated in 0.0017 seconds