Bidentate imidazole-based extractants, 1-octylimidazole-2-aldoxime (OIMOX) and 1-octyl-2-(2′-pyridyl)imidazole (OPIM), along with dinonylnaphthalene sulfonic acid (DNNSA) as a synergist, were investigated as potential selective extractants for Cu²⁺and Ni²⁺ respectively from base metals in a solvent extraction system. The study was extended to evaluate the sorption and separation of Ni²⁺ from other base metals in a solid-solution system using microspherical Merrifield resins and nanofibers functionalized with 2,2′-pyridylimidazole. Copper was effectively separated with OIMOX and DNNSA as extractants from nickel with ΔpH½ ≈1.05 and the extraction order of Cu²⁺ > Ni²⁺ > Zn²⁺ > Cd²⁺> Co²⁺ was achieved as a function of pH. At pH 1.65 the extracted copper, from a synthetic mixture of the base metals reached 90.13(±0.90)%, and through a two-step extraction process 98.22(±0.29)% copper was recovered with negligible nickel and cobalt impurities. Stripping of the copper from the loaded organic phase using TraceSelect sulphuric acid at pH 0.35 yielded 96.60(±0.44)% of the loaded quantity after the second stage of stripping. The separation of Ni²⁺ from the borderline and hard acids; Co²⁺, Cu²⁺, Zn²⁺, Fe2²⁺, Fe²⁺, Mn²⁺, Mg2²⁺ and Ca²⁺ at a pH range of 0.5-3.5 with OPIM and DNNSA was acvieved to the tune of a ΔpH½≈ 1.6 with respect to cobalt from a sulfate and sulfate/chloride media. A three-stage counter-current extraction of Ni²⁺, at the optimized pH of 1.89, from a synthetic mixture of Ni²⁺, Co²⁺ and Cu²⁺, yielded 99.01(±1.79)%. The total co-extracted Cu²⁺ was 48.72(±0.24)% of the original quantity in the mixture, and it was 19.85(±0.28%) for Co²⁺. The co-extracted Cu²⁺ was scrubbed off from the loaded organic phase at pH≈8.5 by using an ammonium buffer, while co-extracted Co²⁺ was selectively and quantitatively stripped with H₂SO₄ at pH 1.64. The total recovery of Ni²⁺ by stripping at pH 0.32 was 94.05(±1.70)%. In the solid-liquid system, Ni²⁺ was separated from Co²⁺, Cu²⁺, and Fe²⁺ with the microspherical resins funtionalised with 2,2′-pyridylimidazole by a separation factor (β) in the range 22-45. Electrospun nanofibers as sorbents yielded high sorption capacity in the range of 0.97 - 1.45 mmol.g⁻¹ for the same metals ions. Thus, 1-octylimidazole-2-aldoxime (OIMOX), and1-octyl-2-(2′-pyridyl)imidazole (OPIM) can be effectively utilized alongside DNNSA as a co-extractant in the separation of Cu²⁺ and Ni²⁺ respectively from base metals in acidic sulfate medium in a solvent extraction process, and the latter as a selective ligand in the solid-liquid separation of Ni²⁺ from Co²⁺, Cu²⁺, and Fe²⁺.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:rhodes/vital:4281 |
| Date | January 2013 |
| Creators | Okewole, Adeleye Ishola |
| Publisher | Rhodes University, Faculty of Science, Chemistry |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Doctoral, PhD |
| Format | 225 leaves, pdf |
| Rights | Okewole, Adeleye Ishola |
Page generated in 0.011 seconds