Diploma thesis gives an overview of artificial lightweight aggregates based on fly ash. Fly ash such as the residues of coal burning is currently one of the most used secondary raw materials for new building materials for research papers. The results shows that the secondary energy products are not just fully substitute the primary component, but in many cases improves the final properties of building products. Wide complex of fly ashes not only from domestic sources was tested and it`s main properties important for it`s further application was determined. Laboratory production of artificial aggregates based on fly ash made by sintering and also by cold bonding and following manufacture of artificial fly ash aggregates in technological conditions are also solved. The thesis is simultaneously concentrate on review of the suitability of fly ash aggregates in lightweight concrete.It was found that the highest quality fly ash for the production of sintered fly ash aggregate is fly ash and FBC ash is the best for the production of cold bonded aggregates. It was also verified that both types of aggregates are applicable to lightweight concrete class LC 20/22. The vast majority of manufactured aggregates is suitable for the production of lightweight concrete class LC 30/33. It was demonstrated that the sintered fly ash aggregates can be also used for high strength lightweight concrete class LC 50/55. Tests have also verified that all tested fly ashes and products produced from them meet the requirements of legislation on environment.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:226707 |
| Date | January 2014 |
| Creators | Zahálka, Milan |
| Contributors | Donát, Pavel, Drochytka, Rostislav |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds