Products produced by a Swedish company are requested to be investigated regarding their harmonic and inter-harmonic currents injected into the public supply system to comply with the Swedish standard SS-EN IEC 61000-3-2, Electromagnetic compatibility (EMC). On behalf of Systemair Sweden AB, this bachelor thesis aims firstly to investigate if their product, PAFEC 4225 WH (Air Curtain), complies with standard SS-EN IEC 61000-3-2, and if not, what measures should be taken; and secondly to develop a low-cost instrument for the measurement of harmonics and inter-harmonics according to standard IEC 61000-4-7 related to the requirements on equipment used in standard SS-EN IEC 61000-3-2. To this purpose, the standards have been looked into thoroughly, the preconditions for measurements have been studied in detail, and external meetings with a consultant at Delta Development Technology AB have been performed. Measurements of the harmonic spectrum generated by PAFEC 4225 WH have been performed first at Systemair Sweden AB’s Technical center in Skinnskatteberg, and later at Delta Development in Västerås. After this, a low-cost instrument was developed, including hardware and software design and implementation. The hardware implementation consists of a circuit board designed using EasyEDA (an online PCB Design Tool), a NI myDAQ (a data acquisition device made by National Instruments), and an enclosure designed with Solidworks and made with a 3D-printer. The software implementation was conducted using LabVIEW – a graphical programming language. A few measurements were performed using instruments complying IEC 61000-4-7 at Delta Development, and later with the low-cost instrument. Different line chokes were measured. The results showed that a 15 mH line choke connected in series with each motor would make the PAFEC 4225 WH comply with SS-EN IEC 61000-3-2. The results from the low-cost instrument did not match Delta Developments results regarding harmonic and inter-harmonic content. The difference could be caused by unfinished algorithm, different measurements conditions, and missing anti-aliasing-filter. For the future work it is recommended that Systemair Sweden AB can either develop the low-cost instrument or buy an existing instrument that complies with IEC 61000-4-7, to enable to do measurements that comply with SS-EN IEC 61000-3-2. One does also need to investigate the grid during low activity or consider buying a signal generator for the purpose of fulfilling the preconditions to enable measurements. It is also recommended that further measurements are performed with the proposed line choke installed to check for any change in performance of the product.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-479002 |
| Date | January 2022 |
| Creators | Aitman, Victor |
| Publisher | Uppsala universitet, Signaler och system |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.003 seconds