Altered flow regimes following river regulation can result in significant changes in river bed geomorphology and subsequent negative ecological impacts caused by re-suspended sediments deposited on the riverbed. This study aimed to evaluate the consequences of implementing an ecological flow regime on sediments accumulated within the regulated river Juktån. Sediments were sampled and analysed for particle size distribution to estimate sediment stability. Flow alteration following the ecological flow regime was analysed with HEC-RAS unsteady flow simulation serving as a basis for calculations of forces acting to erode or retain deposited sediments. Additional analyses regarding critical flow were made with HEC-RAS steady flow simulation. Results show that 4 out of 15 cross-sections analysed would have the potential to erode and re-suspend sediments. The estimated average critical flow for when sediments become unstable with potential to re-suspend is 17 m3/s. The total sediment inventory of the studied reach is ~25000 ton, with ~3000-ton sediments potentially eroding into re-suspension. This is approximately 3% of river Umeälvens annual 100 000 ton suspended sediments before being regulated. Results indicate that river bed heterogeneity in river Juktån could benefit from implementing the ecological flow regime while not mobilizing such amounts of fine sediments that would cause clogging effects downstream the site of interest. The study also introduces the erosion rate equation which compares the annual erosion between two different flow regimes.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:umu-145948 |
Date | January 2018 |
Creators | Andersson Nyberg, Adrian |
Publisher | Umeå universitet, Institutionen för ekologi, miljö och geovetenskap |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0029 seconds