The diploma thesis deals with putting the pendulum into upright position and its stabilization on a real system. The opening chapter describes the limiting various implementation inverse pendulums, the use of major laboratory tasks in industry, and the selection of appropriate methods for stabilization. The real system was properly identified and parameterized. The mathematical model of the inverse pendulum was derived using the Lagrange method of the second type, the nonlinear system was converted into a status description and linearized for the needs of the state controller design. The system was simulated in the Matlab Simulink environment. The LQR controller was chosen as the regulator stabilizing in upright cases. A Kalman controller in discrete form was prepared for the filter signal and estimation of residual states. The energy method was chosen for the upright pendulums. The proposed methods were tested and implemented in simulation and on a real system.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:413150 |
| Date | January 2020 |
| Creators | Maralík, Marek |
| Contributors | Veselý, Libor, Pohl, Lukáš |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0025 seconds