This thesis describes compensation techniques for cascaded delta-sigma A/D
converters (ADCs) and high-performance switched-capacitor (SC) circuits. Various
correlated-double-sampling (CDS) techniques are presented to reduce the effects of the
nonidealities, such as clock feedthrough, charge injection, opamp input-referred noise and
offset, and finite opamp gain, in SC circuits. A CDS technique for the compensation of
opamp input-referred offset and clock-feedthrough effect is examined and improved to
achieve continuous operation. Experimental results show that after the compensation, the
SC integrator's output signal swing is greatly increased.
The effects of the analog circuitry nonidealities in delta-sigma ADCs are also analyzed.
The analysis shows that the nonidealities in cascaded delta-sigma ADCs cause
noise leakage, which limits the overall performance of the cascaded modulators. In order
to reduce the noise leakage, a novel adaptive compensation technique is proposed. To
verify the effectiveness of the proposed compensation techniques, a prototype 2-0 cascaded
modulator was designed. Its first stage, a second-order delta-sigma modulator with
test signal input circuit, was designed and fabricated in 1.2 ��m CMOS technology. The
measurement results show that the noise leakage is reduced effectively by the compensation,
and the performance of the cascaded delta-sigma modulator is greatly improved. / Graduation date: 1999
| Identifer | oai:union.ndltd.org:ORGSU/oai:ir.library.oregonstate.edu:1957/33536 |
| Date | 21 September 1998 |
| Creators | Sun, Tao |
| Contributors | Temes, Gabor C. |
| Source Sets | Oregon State University |
| Language | en_US |
| Detected Language | English |
| Type | Thesis/Dissertation |
Page generated in 0.0021 seconds