Return to search

Design, Analysis and Experimental Evaluation of a Virtual Synchronous Machine Based Control Scheme for STATCOM Applications

Because renewable energy sources are environment-friendly and inexhaustible, more and more renewable energy power plants have been integrated into power grids worldwide. To compensate for their inherent variability, STATCOMs are typically installed at the point of common coupling (PCC) to help their operation by regulating the PCC voltage. However under different contingencies, PCC voltage fluctuations in magnitude and frequency may impede the STATCOM from tracking the grid frequency correctly, hence worsening its overall compensation performance, and putting at risk the operation of the power plant. Further, the virtual synchronous machine (VSM) concept has recently been introduced to control grid-connected inverters emulating the behavior of rotating synchronous machines, in an effort to eliminate the shortcomings of conventional d-q frame phase-locked loops (PLL).

In this dissertation, the VSM concept is extended by developing a STATCOM controller with it, which then behaves like a fully-adjustable synchronous condenser, including the adjustment of its "virtual" inertia and impedance. An average model in two D-Q frames is proposed to analyze the inherent dynamics of the VSM-based STATCOM controller with insight into impacts from the virtual parameters and a design guideline is then formulated. The proposed controller is compared against existent d-q frame STATCOM control strategies, evincing how the VSM-based approach guarantees an improved voltage regulation performance at the PCC by adjusting the phase of its compensating current during frequency fluctuations, in both simulation and experiment.

Secondly, the dynamics of the VSM-based STATCOM controller in large signal sense is studied, especially its capability to ride through faults. Analysis is carried out with phasors to obtain a fundamental understanding at first and followed by state space equations to predict the transients analytically, which is validated by matching both simulation and experiment. The effects of two outer loops are also reviewed and some possible solutions are suggested and evaluated. Moreover, the relationship between the virtual inertia and the actual inertia is established and the dc capacitor sizing is discussed in a possibly more economical way. The start-up process of a VSM-based STATCOM is presented to implement a practical prototype as well. / Master of Science

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/78158
Date23 September 2015
CreatorsLi, Chi
ContributorsElectrical and Computer Engineering, Burgos, Rolando, Boroyevich, Dushan, Mili, Lamine M.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Languageen_US
Detected LanguageEnglish
TypeThesis, Text
Formatapplication/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/

Page generated in 0.0023 seconds