Made available in DSpace on 2014-12-17T15:03:20Z (GMT). No. of bitstreams: 1
AndressaDL.pdf: 2033503 bytes, checksum: bb95c834e7758cc771aaa11779a97e45 (MD5)
Previous issue date: 2009-04-30 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Sludge of Wastewater Treatment Plants (WTPs) disposal is a problem for any municipality, for this reason the amount of sludge production is now a key issue in selecting treatment methods. It is necessary to investigate new applications for this waste type, due to the restrictions imposed by the environmental organs. The raw materials used in the Red Ceramic, are generally very heterogeneous, for this reason, such materials can tolerate the presence of different types of wastes. In Rio Grande do Norte, the roof tiles production corresponds to 60,61% from the total of ceramic units produced. Due to the importance of the ceramic industry of roof tiles for the state, allied to the environmental problem of the sludge disposal, this work had for objective to verify the possibility of the incorporation of sewage sludge in ceramic body used for production of roof tiles. In the research, sludge originating from drying beds of WTP of the Central Campus from UFRN and clays originating from a ceramic industry from Goianinha/RN were used. The raw materials were characterized by techniques of: analysis of particles distribution by diffraction to laser; real density; consistence limits; chemical analysis by X-ray fluorescence; mineralogical analysis by X-ray diffraction; organic matter; and solids content. Five batches of roof tiles were manufactured in the approximate dosages of 2%, 4%, 6%, 8% and 10%. To evaluate the properties of each final product, tests of water absorption, impermeability, bending strength, leachability and solubility were accomplished. The roof tiles manufactured with sludge presented characteristics similar to the roof tiles without sludge in relation to the environmental risk. The results showed that it is possible to use approximately up to 4% of sludge in ceramic bodies for production of roof tiles. However, it is observed that the high amount of organic matter (71%) present in the sludge is shown as factor that limits the sludge incorporation in ceramic bodies, worsening the quality of the roof tiles. It is necessary the use of mixtures of different raw materials under point of view of the granulometry and of the other chemical and mineralogical properties for the obtaining of a satisfactory mass to the production of ceramic roof tiles / A disposi??o de lodo de Esta??es de Tratamento de Esgotos (ETEs) ? um problema para qualquer municipalidade, por isso a quantidade de lodo produzido ? hoje um assunto fundamental na sele??o de m?todos de tratamento. Faz-se necess?rio investigar novas aplica??es para esse tipo de res?duo, face ?s restri??es impostas pelos ?rg?os ambientais. As mat?rias-primas utilizadas na Cer?mica Vermelha, em geral, s?o muito heterog?neas, por isso podem tolerar a presen?a de tipos diferentes de res?duos. No Rio Grande do Norte, a produ??o de telhas corresponde a 60,61% do total de pe?as cer?micas produzidas. Dada a import?ncia da ind?stria cer?mica de telhas para o estado, aliada ? problem?tica ambiental da disposi??o de lodo, este trabalho teve por objetivo verificar a possibilidade da incorpora??o de lodo de esgotos em massa cer?mica utilizada para fabrica??o de telhas. Foram utilizados na pesquisa lodo proveniente dos leitos de secagem da ETE do Campus Central da UFRN e argilas provenientes de uma ind?stria cer?mica de Goianinha/RN. As mat?rias-primas foram caracterizadas por t?cnicas de: an?lise de distribui??o de part?culas por difra??o ? laser; densidade real; limites de consist?ncia; an?lise qu?mica por fluoresc?ncia de raios X; an?lise mineral?gica por difra??o de raios X; mat?ria org?nica; e teor de s?lidos. Foram fabricados cinco lotes de telhas nas dosagens aproximadas de 2%, 4%, 6%, 8% e 10%. Para avaliar as propriedades de cada produto final, foram realizados ensaios de absor??o de ?gua, impermeabilidade, carga de ruptura ? flex?o, lixivia??o e solubiliza??o. As telhas fabricadas com lodo apresentaram caracter?sticas semelhantes ?s telhas sem lodo no que diz respeito ao risco ambiental. Os resultados mostraram que ? poss?vel utilizar aproximadamente at? 4% de lodo em massas cer?micas para fabrica??o de telhas. Contudo, observa-se que a elevada quantidade de mat?ria org?nica (71%) presente no lodo mostra-se como fator limitante na incorpora??o de lodo em massas cer?micas, comprometendo a qualidade das telhas. Destaca-se a necessidade de utiliza??o de misturas de diferentes mat?rias-primas do ponto de vista granulom?trico e das outras propriedades qu?micas e mineral?gicas para a obten??o de uma massa satisfat?ria ? produ??o de telhas cer?micas
Identifer | oai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/15953 |
Date | 30 April 2009 |
Creators | Lima, Andressa Dantas de |
Contributors | CPF:00871819406, http://lattes.cnpq.br/1925954531585024, Andrade Neto, C?cero Onofre de, CPF:05712939487, ANDRADE NETO, C?cero Onofre de, Cavalcanti, Paula Frassinetti Feitosa, CPF:10937200425, CAVALCANTI, Paula Frassinetti Feitosa, Ingunza, Maria Del Pilar Durante |
Publisher | Universidade Federal do Rio Grande do Norte, Programa de P?s-gradua??o em Engenharia Sanit?ria, UFRN, BR, Saneamento Ambiental; Meio Ambiente; Recursos H?dricos e Hidr?ulica |
Source Sets | IBICT Brazilian ETDs |
Language | Portuguese |
Detected Language | English |
Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis |
Format | application/pdf |
Source | reponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN |
Rights | info:eu-repo/semantics/embargoedAccess |
Page generated in 0.3096 seconds