A methodology for making a spring back behaviour of hole expansion in gas tank. Work is initiated for SAAb automobile and the geometry of model is created by using the software’s called Unigraphics and hyper mesh and secondly the simulation of the model is done in Ls-dyna to know the spring back behaviour of hole with various depth and positions of the punch. The yield strength of the element and stress, strain distribution and different radius of the blank are used to reduce the cracks at the lower edge of the blank. Steel material is used and the thickness of the material (0.229mm). The simulation of the work includes loading of punch and its displacement. This study demonstrates the efficiency of the model to simulate the hole expansion and better understanding of the expansion of radius and spring back angle. / Measurement of spring back behaviour
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hv-3321 |
Date | January 2011 |
Creators | Balina, Kranthi Kumar |
Publisher | Högskolan Väst, Institutionen för ingenjörsvetenskap |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0069 seconds