The following report conducted with the collaboration with the University of Halmstad and Halmstad Gummi Fabric (HGF) rubber company which is in Halmstad. The focus on the project is to reduce the cost of the transfer mold material, increase efficiency of production, save energy and redesign the transfer mold. The methodology used in this project is based on the Quality Functional Deployment (QFD) which is widely appreciated globally in the product development, and other product development and mold design methods, FEM analysis are applied to achieve the goals. The implementation of this methods is efficient and beneficial to reduce the material cost and redesign the transfer mold without compromising the initial quality of the product. This thesis resulted in, for the transfer molding plates we recommended the proper material for the plates and the insulation parts. And we redesign the transfer mold plates and optimized the design for reducing the cost. We did FEM analysis for optimization purpose, and the benefits to optimizing this is to reduce the material cost, machining cost and labour cost. As well as, we add the insulation plates in the design so that the transfer molding plates works efficiently with the reducing the energy wastes.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hh-39904 |
| Date | January 2019 |
| Creators | Wang, Xiaoyan, Patel, Parthkumar |
| Publisher | Högskolan i Halmstad, Akademin för ekonomi, teknik och naturvetenskap, Högskolan i Halmstad, Akademin för ekonomi, teknik och naturvetenskap |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0019 seconds