Return to search

Construction of sediment budgets in large scale drainage basins : the case of the upper Indus River

High rates of soil loss and high sediment loads in rivers necessitate efficient monitoring and quantification methodologies so that effective land management strategies can be designed. Constructing a sediment budget is a useful approach to address these issues. Quantifying a sediment budget using classical field-based techniques, however, is labour intensive and expensive for poorly gauged, large drainage basins. The availability of global environmental datasets in combination with GIS techniques provides an opportunity for studying large basins. Following this approach, a framework is presented for constructing sediment budgets for large, data-sparse drainage basins, which is applied to the mountainous upper Indus River basin in northern Pakistan. The methodological framework consists of five steps: (1) analyzing hydro-climatological data for dividing the drainage basin into characteristic regions, and calculating sediment yields; (2) investigation of major controls on sediment yields; (3) identification and mapping of sediment source areas by spatially distributed modelling of erosional processes; (4) spatially distributed modelling of sediment yields; and (5) carrying out the sediment budget balance calculation at the basin outlet. Further analysis carried out on the Indus data has enabled a better understanding of sediment dynamics in the basin.<p>
Analysis of the available hydro-climatological data indicates that the basin can be subdivided into three characteristic regions based on whether runoff production and subsequent sediment generation is controlled by temperature (Region 1, upper, glacierized sub-basins), precipitation caused by the monsoon and western disturbances (Region 3, lower sub-basins), or a combination of the two (Region 2, middle reach sub-basins). It is also demonstrated that contrary to the conventional model, the specific sediment yield increases markedly with drainage area along the Indus River. An investigation of major controls on specific sediment yield in the basin indicates that percent snow/ice cover is a major land cover control for specific sediment yield. Spatially distributed erosion modelling predictions indicate that 87% of the annual gross erosion takes place in the three summer months with greatest erosion potential concentrated in sub-basins with high relief and a substantial proportion of glacierized area. Lower erosion rates can be explained by the arid climate and low relief on the Tibetan Plateau, and by the dense vegetation and lower relief in the lower monsoon sub-region. The model predicts an average annual erosion rate of 3.2 mm/a or 868 Mt/a. Spatially distributed sediment yield predictions made with coupled models of erosion and sediment delivery indicate that the Indus sub-basins generally show an increase of sediment delivery ratio with basin area. The predicted annual basin sediment yield is 244 Mt/a and the overall sediment delivery ratio in the basin is calculated as 0.28. The long-term mean annual sediment budget, based on mass balance, is characterized by a gross erosion of 762.9, 96.7 and 8.4 Mt, and a gross storage of 551.4, 66.1, and 6.5 Mt in the upper, middle, and lower regions of the basin, respectively. The sediment budget indicates that the major sources of eroded sediment are located in the Karakoram, in particular in the Hunza basin. Substantial sediment storage occurs on the relatively flat Tibetan Plateau and the Indus River valley reach between Partab Bridge and Shatial. The presented framework for sediment budget construction requires relatively few data, mostly derived from global datasets. It therefore can be utilized for other ungauged or poorly gauged drainage basins of the world.

Identiferoai:union.ndltd.org:USASK/oai:usask.ca:etd-12012009-234340
Date03 December 2009
CreatorsAli, Khawaja Faran
ContributorsDe Boer, Dirk, Ashmore, Peter, Martz, Lawrence, Aitken, Alec, Guo, Xulin, Maule, Charles
PublisherUniversity of Saskatchewan
Source SetsUniversity of Saskatchewan Library
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://library.usask.ca/theses/available/etd-12012009-234340/
Rightsunrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Page generated in 0.0022 seconds