Byggprojekt är hårt tidsatta och det är viktigt att de planeringar som tas fram stämmer väl överens med verkligheten. Betongens uttorkning kan bli en begränsande faktor som förlänger byggtiden då ytskikt inte kan appliceras om den är för fuktig. Vid en för tidigt applicering kan fuktskador uppstå och kemiska emissioner kan avges som påverkar inomhusklimatet. En väl utförd planering av betongens uttorkning är därför viktig och som hjälp finns simuleringsprogram som ska hjälpa entreprenören. Trots tillgängligheten uppstår problem fortfarande med fuktskador och förseningar. Syftet med studien är att förse entreprenören med ytterligare data för att undvika problem relaterade till betongens uttorkning i sina byggprojekt. Det ska förhoppningsvis leda till bättre planering kring betongens uttorkning och mer ekonomiskt hållbara val och minskad mängd fuktskador. Studien utfördes genom att simulera ett standardfall framtaget i samarbete med Nåiden Bygg AB. Programmet som använts i studien är TorkaS v3.2 och ett flertal faktorer kring klimat, konstruktion och betong har undersökts. Resultatet visar att det är främst betongens egenskaper och konstruktionens utformning som påverkar uttorkningstiden. Det omkringliggande klimatet har endast en liten inverkan. En slutsats som kan dras är att uttorkningstiden kan minskas kraftigt genom att öka kvalitén på betongen eller förändra konstruktionen. Hur väl det går att tillämpa i verkligheten och vilka kostnader det innebär måste entreprenören själv undersöka från fall till fall. / Construction projects are under hard time constraints and it’s important that the planning correspond well with reality. The drying of concrete can often become a limiting factor in the projects planning. If the relative humidity in the concrete is to high moisture problems can occur and chemical emissions in the form of volatile organic compounds can cause problems later if floor materials are applied too early. A well done planning of the constructions project is thereby very important and the entrepreneur have simulation software as help to calculate the drying process of concrete. The purpose of the study is too supply the entrepreneur with more data concerning the drying of concrete. Hopefully the study will lead to improved planning by a better understanding of the problem, improved economic decisions and less future moisture damages. The study was performed with the software TorkaS v3.2 by simulating the drying of concrete in a predefined project. The project definitions was determined in cooperation with Nåiden Bygg AB. The importance of construction, climate and concrete factors were then tested. The result show that it’s mostly the construction and concrete factors that affected the drying times. The surrounding climate made only a small difference. A conclusion from the study is that the drying times can improve drastically if a better quality concrete is used and/or a thinner construction is used. How this apply to the reality and to what costs in can be done the entrepreneur have to examine more thoroughly themself.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:umu-141007 |
Date | January 2017 |
Creators | Martin, Rönntoft |
Publisher | Umeå universitet, Institutionen för tillämpad fysik och elektronik |
Source Sets | DiVA Archive at Upsalla University |
Language | Swedish |
Detected Language | Swedish |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0062 seconds